Double-pressure pipe
Zhejiang Zhengkang Industrial Co., Ltd.

Double-pressure pipe

Double-pressure pipe

Summary

double clamping connection definition:
A connection method in which pipes are connected with socket fittings with special sealing rings, and special tools are used to compress the gates for sealing and fastening.

double clamping connection principle:
Double clamping connection is derived from the mature mainstream technology in Germany. Due to the full use of the effective rigidity of the stainless steel pipe itself, both ends are crimped with calipers at the connection between the pipe and the pipe fitting, thus realizing the surface fixation, double-sided crimping and double protection, thus greatly improving its anti-pulling ability and anti-rotation ability.
The double-clamping pipe adopts the advanced compression ratio principle of O-ring. After the O-ring in the U-groove is compressed, it exerts long-term elasticity, thus realizing the purpose of sealing. In addition, the double-clamping pipe can effectively prevent the risk of water leakage when the pipe cannot be inserted to the bottom due to the advantage of the receiving port.

 

Executive standard for double-clamping stainless steel pipes and fittings

1. Pipe standard ▼

① GB/T19228.2-2011 "stainless steel clamping type pipe fitting assembly part 2: thin-walled stainless steel pipe for connection"
[in accordance with DIN EN10312-1999 "liquid (including drinking water) transport stainless steel pipe"]
② CJ/T151-2016 Thin-walled Stainless Steel Tube

2. Pipe fittings standard ▼

① GB/T19228.1-2011 -1-Stainless Steel Pin-on Fittings-Part 1: Pin-on Fittings
Conform to DVGW W534-1995 "clamping type stainless steel pipe fittings"
CJ/T152-2016 Thin-walled Stainless Steel Clamper and Groove Fittings

3. Seal ring standard ▼

GB/T 19228.3-2012 "stainless steel clamp type pipe fitting assembly part 3: O type rubber sealing ring"

4. Health standards

GB/T17219-2001-Safety evaluation standard for domestic water distribution equipment and protective materials

5. Design & Construction Standards

① GB/T 29038-2012 Technical Specification for Thin-walled Stainless Steel Pipe
② CECS 153:2003 Water Supply Regulations for Building Water Supply Thin-walled Stainless Steel Pipe Pipeline Engineering
③22S407-2Installation of thin-walled stainless steel pipes for building water supply

 

Application fields of double-clamping type stainless steel pipes and fittings

It is suitable for low-pressure fluid transportation in cold and hot water, direct drinking water, heating, air conditioning, fire fighting, gas and other civil applications. It can also be used for low-pressure fluid transportation in pharmaceutical, beverage, food, chemical and other industries.

 

Picture Name